Power Rack & Pinion Kit 58-64 Impala/Bel Air
This is a front steer center take off style rack & pinion that matches the stock front end and suspension. The rack is mounted to a one piece mounting bracket that bolts into the same factory holes for the steering box and idler arm. The kit does clear the Z Bar and 4 speed linkage, but does not work with the factory 348 & 409 Engines. If your vehicle had factory power steering, you will need to use our stabilizer bar mounts which are included in place of the factory mounts.
Our kit probably will not work with aftermarket suspension that change the original suspension, but give us a call!
This kit works on most big block engine applications with short water pumps. Installs have been done successfully using Hooker Long Tube Headers. The kits are complete with a shaft kit which includes two u-joints and shafting as well as a pump kit with a pump matched to the gear, clip on reservoir, and Single V-Groove Pulley.
|Pinion Type / Size:||3/4" - 36 Spline||Rack & Pinion|
|Amount of Travel:||7"||Outer Tie Rod Ends|
|Turns Lock to Lock:||3 Turns||Mounting Bracket|
|Pressure Port Size:||18mm - 6 AN||Mounting Hardware|
|Return Port Size:||16mm - 8AN|
|Pump Required:||High Flow / Pressure|
|Inner End Threads:||M14 x 1.5|
|Brand||UNISTEER PERF PRODUCTS|
|Truck Freight Only||NO|